Six Tips for Choosing the Best Thermostat Placement in Your Home in Fair Oaks, CA

September 10, 2019 8:51 pm Published by Leave your thoughts

If you have a central heating and cooling system in your home, you need a thermostat to control the temperature. It’s also how your furnace or air conditioner knows to turn on, and accurate readings are important. So, what are the dos and don’ts of new HVAC thermostat installations? This is an excellent question! Below are six pro tips for choosing the best thermostat placement in your home in Fair Oaks, CA:

  • Keep it away from doors and windows: Even with good weather-stripping, the areas around doors and windows will experience fluctuations in temperature. Drafty windows can raise and lower temperatures depending on the season, as can constantly opening and closing doors. A temperature shift can trigger the AC or heater to turn on without much benefit to you.
  • Avoid direct sunlight: A thermostat sitting in direct sunlight will most always show inaccurate readings. Like a person sitting near a sunny window, a thermostat too will feel the heat. It’ll kick on when it senses heat, possibly engaging the air conditioner instead of the heater in the winter, for example.
  • Don’t place it above air vents: Heated or cooled air enters your living spaces through air vents. If your thermostat is located above a vent, then its temperature readings will be inaccurate simply because it’s getting blasted with hot or cold air. Place the thermostat properly to avoid impacting your home’s comfort.
  • Place it on an interior wall: Your thermostat works by measuring the average temperature of your home so it can keep the air at comfortable levels throughout the day. Therefore, it makes sense to install it in a spot in your home that’s far away from areas that tend to have greater variations in temperature. The best place is on an interior wall, like in the living room or family room, or in another commonly used room where optimal temperature control is desired.
  • Put it in a central location: In addition to placing the thermostat on an interior wall, you should also place it in a central location, such as the center-most room of your house. By doing this, the thermostat will read centrally circulating air to give you the most accurate average home temperature.
  • Install it the right height above the floor: A great pro tip is to install your thermostat between 52 and 60 inches above the floor. This ensures it’s getting an average reading of your indoor air temperature. Heat rises, so putting it lower than 52 inches may lead to too low of a reading, while above 60 inches could make it read too high.

Even though every home layout is different, these tips can help you select the best place for a thermostat in Fair Oaks, CA. All you need to do is remember to pick a central location, place it on an interior wall, keep it away from windows, doors and air vents and mount it 52 to 60 inches off the floor. If you need assistance, don’t hesitate to contact Cassel Air Conditioning and Heating Service today!

Categorised in:

This post was written by Writer

Leave a Reply

Your email address will not be published. Required fields are marked *